Getting a ton of PCI/PCIe bus errors

Используйте новую бета-версию 8.11-5550. При возникновении ошибки в подсказке должно отображаться неисправное устройство.
У меня много ошибок. Я уже 4-е расширение видеокарты поменял и все равно то же самое. Помогите.
 
Hello!
Need your help. Here's debug file from my wife's PC. From time to time it is just freeze, w/o any response, only hard reboot help. Attaching file and hopes on answering. Thank you in advance!
 
Здравствуйте! Компьютер часто перезагружается, пишет ошибку "количество накопленных ошибок PCI/PCIE устройства". А иногда работает стабильно. КАК исправить эту ошибку?
 
Actually, it is necessary to correctly decode tire errors codes for a specific computers and at least a POST-card diagnostic board, and better, and be able to work with it and know a comprehensive designer at least at the level of an electronic engineer. Then we can say with a fairly high accuracy what caused a refusal. Or sits down with devices and check every little thing. Otherwise, the assessment will be very approximate.
 

GeKa_Uss

Как минимум проверьте все кабельные соединения - мало ли какой выыпал из разъёма. Электроника на 98% это наука контактах.
At least check all the cable connections - you never know which you poured out of the connector. Electronics by 98% is a science of contacts.
 
Not related to HWiNFO directly but to solve PCI errors I did the following (Intel B760, GTX 1060, Intel 12th)
  1. Boot into BIOS
  2. Go to ASPM settings for PEG, PCH, etc.
  3. Select L1 only for every category if possible (L0s can cause problems and even lower FPS in MSI Kombustor)
  4. PCI Express Native Power Management to Enabled
  5. Set Native ASPM to Disabled (BIOS controlled)
Example for ASUS
1739296253457.png
 
Hi everyone - I just got a new GPU and noted that Risercables with pcie 4 might cause issues.
I went and tried and so far it seemed fine - no issues in games and applications as everything performs as expected and upon
checking the temps. I saw in HWInfo that I get "a ton of pcie bus errors"

Can someone help me what might be the actual issue before I go and get rid of the riser cable and put the gpu in the normal way or if it might be one of the ssds?
pls let me know if the file attached is the wrong one or format.

thanks for every input
 

Attachments

Back
Top