Drive Available Space randomly changing from 100% to 0%

[ggilove2ski]

Hi Team,


I've recently built a new PC and noticed an odd issue when using HWiNFO. The available space on one of my drives occasionally shows as 0% and then quickly returns to 100%.


However, when checking the drive using other monitoring tools and Windows utilities, everything appears to be functioning normally. The drive is new, and none of the other tools report any issues. I assume Windows would provide a warning if the drive were truly full, but I haven't seen any alerts so far.


Could this be a bug in HWiNFO or possibly something else I should look into?

Below are key points

-Ver - HWiNFO 64 v8.28-5770
-Mobo Asrock Z890 Steel legend
-Team Mp44Q hard drive.

 

[ggilove2ski]

attaching

 

[Martin]

Could be an erratum in drive firmware, other tools probably don't report this parameter only the remaining life.

 

[ggilove2ski]

Thank you Martin , I will stop monitoring than.

 

[lhleung42]

All monitor stopped monitoring suddenly for every windows restart. It also corrupt msi center. After I reinstall back version 8.26. Everything solved. Please check the problematic version 8.28

 

[Martin]

Can you please be more specific, what exactly happened?