Some Undervolt Offsets Not Reported Accurately

[jayzero]

Asus G18 Notebook w/ i9-13980HX

No undervolt applied via Bios - Offsets done via Throttlestop upon OS boot/login.
Throttlestop runs before HWiNFO runs.

ThrottleStop CPU Voltage Offset Settings:
CPU Core @ -130.9mV
CPU P Cache @ -120.1mV
System Agent @ -40.0mV
Intel GPU @ -40.0mV
iGPU Unslice @ -40.0mV
CPU E Cache @ -90.8mV

HWiNFO Reported Voltages:
IA Voltage Offset @ 0.029V
GT Voltage Offset @ -0.040V
CLR Voltage Offset @ 0.029V
GT Media Voltage Offset @ -0.040V
SA Voltage Offset @ -0.040V
L2 E-core Voltage Offset @ -0.091V

Looks like its just the Cpu Core & Cpu P Cache Offsets that are not being reported correctly for some reason.
I tried exiting HW, close TS, restart TS, restart HW - values remain the same.

I noticed this after updating to HW 8.11-5550, although it seems to have been this way for some time now as I resinstalled the previous version I was running (8.05-5490) and the reporting is also not accurate.

 

[Martin]

If those offsets are applied to the V/F curve (not a static offset), then you need to look for the "Voltage/Frequency Curve:" values in main window of HWiNFO.
Sensor values in HWiNFO don't show the entire V/F curve values.

 

[jayzero]

These correct? The only other thing that comes to mind is a Bios update I did about a month or so ago on my notebook that could be causing this - Asus IS kinda weird(annoying) about their notebook Bios' & settings (or lack thereof).

 

[Martin]

Yes, those. Note, that HWiNFO doesn't constantly read those values during runtime. So, if they were changed, you will need to restart HWiNFO to read them again.