RAM and motherboard manufacturer does not get detected

[partha_roy]

Hi,

I have 2 of these RAM modules and the motherboard from a brand called ANT Esports and their manufacturer is not detected. Purchase link to the RAM is https://www.amazon.in/gp/product/B0BDFMNW81/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1

For the motherboard, the link is https://www.amazon.in/gp/product/B0BB7B9M62/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

PFA the relevant snapshot

 

[Martin]

Each DIMM vendor needs to be registered with JEDEC and have an ID assigned. Vendors that don't comply with this can't be recognized.
I will need to see the HWiNFO Debug File to check this in detail:

IMPORTANT - Read this before submitting a report

In order to submit a bug report, please include the following information: HWiNFO32/64 Report File (HTM or TXT preferred) HWiNFO32/64 Debug File (HWiNFO32.DBG or HWiNFO64.DBG) In case the application crashes or you are not able to create a Report File, please submit only the Debug File. This...

www.hwinfo.com

 

[partha_roy]

Each DIMM vendor needs to be registered with JEDEC and have an ID assigned. Vendors that don't comply with this can't be recognized.
I will need to see the HWiNFO Debug File to check this in detail:

IMPORTANT - Read this before submitting a report

In order to submit a bug report, please include the following information: HWiNFO32/64 Report File (HTM or TXT preferred) HWiNFO32/64 Debug File (HWiNFO32.DBG or HWiNFO64.DBG) In case the application crashes or you are not able to create a Report File, please submit only the Debug File. This...

www.hwinfo.com

Sure, thanks. I would be grateful if you could further explain the reason behind the AORUS insignia being displayed as there is no official affiliation between ANT Esports and Gigabyte

 

[Martin]

That AORUS logo is promo for GIGABYTE until the end of this year. After that it will be shown on GIGABYTE boards only.

 

[partha_roy]

Each DIMM vendor needs to be registered with JEDEC and have an ID assigned. Vendors that don't comply with this can't be recognized.
I will need to see the HWiNFO Debug File to check this in detail:

IMPORTANT - Read this before submitting a report

In order to submit a bug report, please include the following information: HWiNFO32/64 Report File (HTM or TXT preferred) HWiNFO32/64 Debug File (HWiNFO32.DBG or HWiNFO64.DBG) In case the application crashes or you are not able to create a Report File, please submit only the Debug File. This...

www.hwinfo.com

Please find the debug file attached

 

[Martin]

Those modules don't have the Manufacturer ID populated, it's 0.