Search results

Why do you need it the temperature sensor? The power modules have enough built-in control circuits - circuit until the temperature does not exceed the need to change its mode not exceeded - triggers the overload protection.

1) Dell Steam OS is based on Linux OS dialect and HWiNFO32/HWiNFO64 designed for WINNT platform and I seriously doubt that you will run it in LINUX/UNIX, even using the latest version of WINE HQ. You need to look for an analogue HWiNFO written specifically for your operating system, and any...

Perhaps that your card does not have enough capacity to supply chains, such as PSU wires for low current consumption device. The recommended allowable current density of 5 A/mm square. for copper and 3 A/mm square. for aluminum. This is due to the different conductivity of various metals and the...

Not always. The sensor may be in one of several zones board - in the region of the socket near the expansion slots, in the vicinity of the south bridge chip. A specific decision on its position constructor accepts payment by results of its thermal modeling. Usually selected by the average air...

lamb0985 Yes, ITE IT8620E is Super I/O controller, PWM control for temperatures and fan speeds of system board, I can't find manual for this chip.:huh:

lamb0985 Chip Infineon IR3564B (see datasheet, 3 pages, PDF) is Dual Output Digital Multi-Phase PWM controller for AMD/Intel CPU VRM and don't include any PSU sensor's. :shy:

Please, write in English!

chrcoluk Some problem found in Process Hacker - Avast blocking KProcessHacker driver ;)

Martin I do not reproduced. I think that the consequences clink errors - stood me this console extender capabilities and mangled wood, OS I did not rearranging although it would be necessary - too many climbs errors. We clink 0.44 - 0.45 were errors with the disclosure of environment...

Just delete HWiNFO*.INI in to $app dir and set settings again. I have exception code 0xc0000417 after update in v5.32.2900 to v5.33.2910 and just exit HWiNFO64 and remove HWiNFO64.INI and reset settings, then restart HWiNFO64 and set common settings and automatically restore sensor settings...

qweqaz Regular self-questioning range of devices for reading data S.M.A.R.T. in HDD is not shorter than 60 seconds, so often ask him if anything it makes no sense has changed, and if there is a bed unit controller it in real-time itself will fix what will take several turns of the plate...

fred_gaou SDRAM, DDR1 (DDR), Rambus DRAM used sync clock equivalent effective clock, but latest dynamic memory type like DDR2/DDR3/DDR4/DDR5 (GDDR5)/DDRx (GDDRx) used effective clock = multiply * sync clock. This is not achieved at the expense of the internal frequency multiplication, and at...

archer21 Hint - the position of the operating point of the current-voltage characteristics of the transistor thing is very nonlinear and depends on the operating frequency and output impedance, and on its temperature, while the field-effect transistor, unlike the bipolar transistor the...

In my opinion it is a Windows 10 buggy. I'm on one of the machines under Win 7 SP1 x64 the same processor and I did not see any of mistaken identity.

archer21 1) The only objective method of controlling operation modes of electrical systems is the measurement of their parameters using the last metrological verification of measuring instruments. Built-in device hardware and software control of their settings are intended only to indicate a...

archer21 I do not see any obvious errors circuitry. In this case, the power control circuit CPU put on a bus value of the input voltage of individual voltage regulator cores needed at any given time for their work, but as a temporary model of behavior of the switching regulator is similar to...

GRABibus CPU Packege this value chip body temperature measured at a certain point of its surface at a given power dissipation, thermal resistance of the material between the chip and the chip body and ambient temperature. Many manufacturers often do not indicate this reference value and the...

Please, turn off sensor's VIN2/VIN3 and VIN5 - this logical sensor not used for real hardware sensor and hide ASUS EC used RMsClick. This is simple settings.

I'm sorry, but I think in the utility equipment condition monitoring in that it makes no sense. The implementation of this function requires the name of the controlled tasks knowledge and HWiNFO it does not control the programs of work tools. Your problem is solved with the help of specialized...

C47 What you ask is not technically feasible sensor chips of a chip - they measure the current temperature of the crystal, and that the temperature of the motherboard, or rather air at its surface is needed physically isolated from their probe, such as a thermal diode or a thermistor (ideal...