Search results

kenichiA380 In first screenshot see memory leak, but for find source needed debug.

Try to check the USB connection and the contact in the power supply circuit - in this model, stasctics often fail connectors. It looks like it is from a number of Seagate products, together with the purchase of the HDD of the Samsung division of the SpinPoint family, which did not have a high...

desgen Use monitoring tools like Process Hacker and see process properties (go to Process tab and press Enter in to process string) Performance tab, Memory graph and check Memory tab for find whats modules used too much memory and write bug-report to AMD - this is error in to here software...

dbl390 To access the hardware ports, the driver must work in kernel mode. This is determined by the OS specifications.

the_gas Just use MsRClick in needed sensor for go to settings. Is very simple. :)

For 5400 rpm drives it does not matter whether they are connected to SATA-2 or SATA-3, because Bandwidth SATA-2 interface, they have almost threefold margin, and SATA-3 - well, the developer had new chips at hand, so he put them into the scheme.

Elfykins First check S.M.A.R.T. attributes 203 - if not zero them check IDE/power cables, double use HDD check tools like Victoria 3.5.2 for DOS (not Windows! - for correct diagnostic tools needed direct access to IDE port!). Use attached bootable ISO for make CD-ROM/Flash and diag You HDD.

Bomchik Judging by the sensors, these sensors are not used in the circuitry of the board and it is likely that at their output we see the result of a change in the zero bias voltage at the input of their measuring circuits.

michaelrw Just test it.:)

GRABibus G.SKILL International Enterprise as vendor in to tecnical specification on this modules don's display features thermal sensor then this modules don't have it, and this series have minimal timing latency is CL14-14-14-34-2N not Your CL13-14-13-34-1N. If this module is failure then...

Judging by the description of this board can assume that it used an independent control voltage supplied to the CPU core. Such a possibility is in the ASUS DIGI+ controllers, engineers do not deny, but accurate information on this controller is not even in professional journals.

The decision on the set of monitored parameters of the equipment and the points where their measurement (voltage, temperature, fan speed) scheme takes the developer based on the Terms of Reference on its design. If this document is not specified that these options should be available for the...

1) Central % -> rpm is not always possible since not all fans are commercially available pulse tachosensor. In some schemes the number of revolutions control rotation speed estimation is performed based on approximately sufficiently equivalent average voltage applied to the motor and in such...

As the developer of the computer, I can not guarantee you stable operation of the equipment outside the acceptable parameters guaranteed nodes throughout the range of operating conditions. Everything will depend on the specific instances of nodes and the time of their failure.

To All! Happy New Year !

Carlitost A driver from the previous board was removed? If they were, then this may be enough, especially if you were the other chips controllers. Your current m/b https://www.asus.com/Motherboards/P8H61M_PRO/specifications/ used ASMedia chip's, but other m/b can use another controller chip. A...

Davidinlv82 These modules are assembled on the basis of overclocked chips as indicated by their voltage 1,65V - on JDEC DDR3 uses standard voltage 1,5V (1,35V for DDR3L) when using memory chips at a nominal frequency, and if nominal voltage higher than these modules value, the chip module to...

Davidinlv82 Corsair does not indicate the presence of TSOD, then the sensor is not likely in this series of specifications. Look at what is stated in the SPD of your modules in the section Thermal Parameters using Thaiphoon Burner (http://www.softnology.biz/index.html) Freeware version, the...

Please, read https://www.hwinfo.com/forum/Thread-IMPORTANT-Fan-Control

This is a normal consumption current value for low-voltage circuitry. It is the sum of the current consumption of the individual transistors. In itself it is small (MOS transistors operate in micro-mode), but since a lot of them and in relation to the power supply are connected in...