Search results

Zach If simple, then state C6 is the state when the CPU is off, but it is ready to start by an external start signal. The CPU exit from this state is not much different from the initial startup state, except that the control logic skips part of the start-up checks. Also, please, read Intel...

Yes, it was reproduced, the dump (MSVC format - make use dbcore.dll and Process Hacker v3.0.7436.2909 Git-6b1939f9 x64) is voluminous - 110 Mb. Put on the exchanger: https://www.upload.ee/files/11125006/dmp.7z.html messages screenshot:

I will do it - there is one more machine under Win7 there that I will do. True, a dump can come out voluminous - through SeDebugPrivileges I will give a command to create a dump of the process memory.

I met this phenomenon on two machines, though I myself ruined the screenshot of the window indicating the antivirus :( - the screen magnifier was accidentally turned on and as a result the screenshot came out "unreadable".

Driver installation have small problem - then new driver have name HWiNFO150: Old: HWiNFO, HWiNFO Kernel Driver, Driver, Running, System start, \??\C:\Windows\system32\drivers\HWiNFO64A.SYS, Not trusted New: HWiNFO150, HWiNFO Kernel Driver, Driver, Running, System start...

Continue test - try move USB 3.0 HDD in to HP USB 3.0 controller (based on chip TI TUSB7340) on to 5,25" USB Hub based on Genisys Logic GL3510 chip (power on Chieftec GDP-750C (A-90 Series) power supply) - result's: 1) Chieftec GDP-750C (A-90 Series) +5V channel (Vcc) - +5,021V±0,07% (B3-38...

Yes, I almost forgot: For the correct operation of any USB 3.0 controllers with high current loads (>= 0.3A), it is necessary to connect an additional power supply from the PSU to the board! Otherwise, the internal protection against short circuit in the controller chip will work. During the...

Study of the operation of USB 3.0 controllers with high current loads. A brief description of the situation - there are machines on motherboards built on the Intel z68 chipset that do not have a built-in USB 3.0 controller. While the boards worked with the Flash drive, there were no problems -...

UPS can not public internal battery cell status as external value or have proprietary format. At least when I had the APC Omny-SMART 650, it was impossible to read from it to find out the battery level - the device did not report. When the battery was discharged, the signal “Battery low” was...

evlesoa You are in vain afraid of giving the car for warranty repairs and picking drivers for it. The fact is that any developer of an electronic circuit has the right to finalize a typical circuit for switching on a microcircuit published in the technical documentation in accordance with the...

evlesoa Digital technology either works in the case, or basically does not work. There is no third. I showed you specific moments of CPU overheating in your screenshot, but you thought that it doesn’t matter. Well, wait for what happens next. With drivers is similar.

Your laptop CPU is overheating - pay attention to the temperature sensor CPU Packedge == +98 (I marked it on your screenshot) - it means that the heatsink of the CPU cooling system is clogged with dust (in laptops it is usually carried out on the heat pipes outside the package of boards ), or...

evlesoa According to your description, the picture is similar to the failure of the driver startup parameters. Try to remove it using the DDU (Display Driver Uninstaller, author forum page and official download link. No install needed, just unpak use 7-Zip and use :). Notes: then unpack just...

Before install v5.79-3390 additional operation required: sc stop HWiNFO32 && sc delete HWiNFO32 && del /f /q %SystemRoot%\system32\drivers\HWiNFO64A.SYS > nul for clean SCM base and delete old persistent driver.

Check network settings use OS tools - diagnose mast be first.

Gunturas89 Yes, this range of values ​​is acceptable. Voltage stabilizers included in the VRM (Voltage Regualtion Module), depending on the load current, form a voltage different from the rated output. Permissible voltage deviations for circuits +12V ±10%, for circuits +3.3 and +5V ±5%, in...

Sorry. :( I fix typo in my m/b model - GA Z69AP-D3 and chipset iZ69 not exists. Fix: GA Z69AP-D3 - GA Z68AP-D3.

Gunturas89 In this m/b model's don't have sensor +3.3V. Any m/b can don't use some sensor on by circuit design. As samples: m/n GigaByte GA Z68M-D2H only have sensors set: Vtt, 3,3V, +12V, Vcore, Vdimm, +3,3VSB (standbay power), Vbat (m/b LiON battery), m/b (case internal) and CPU temp, CPU...

In the case of Acer, everything can rest on the elementary - this office is pretty tight, and the memory can already be wired on the system board of the machine or there can be a motherboard with only one memory slot. But, judging by the price for this model in assembly it is clearly a budget...

Everything is normal, since the heat dissipation and the amount of heat dissipated by the semiconductor differ at different points of the crystal, especially considering that in the cheap (not server XEON) CPUs of Intel for a long time (starting with the Ivy Bridge series, I refused to use the...